avertX HD420, Руководство пользователя

Страница: 37 / 44

35156AA
37
APR Binding
This function can protect the camera from ARP attacks. When the
camera visits an IP of another network segment via a gateway, it can
communicate only with the MAC address binding to the gateway
address in the same segment.
1. Click Setup > System > Security > ARP Binding.
2. Select the check box to enable the ARP binding function and set
the MAC address.
3. Click Save .
Hide Vendor Information
You can set to hide the vendor information of the network camera on
the Web interface.
1. Click Setup > System > Security .
2. Under Registration Info, select Enable .
Video Watermark
You can set the video watermark for the camera to encrypt the video
and protect it from being deleted or modified.
1. Click Setup > System > Security > Video Watermark.
2. Select Enable and set the watermark content.
3. Click Save .
SYSTEM
Setting the System Time
You can use the following methods to adjust the system time of your
device.
Manually Setting or Synchronizing the System
Time
1. Click Setup > Common > Time , and then click the Time tab.
2. Select Enable for Client Time Synchronization.
3. Click Save .
Synchronizing with the NTP Server
1. Click Setup > Common > Time , and then click the Time tab.
2. Select Enable for NTP , and then enter the IP address of the NTP
server and the camera's sync interval with the NTP server.
3. Click Save . The camera will periodically synchronize time with the
NTP server.
Setting the DST
1. Click Setup > Common > Time , and then click the DST tab.
2. Select Enable DST , set the start time, end time, and DST bias.
3. Click Save .