Avermedia C283S, Руководство пользователя

Страница: 14 / 59

English-7
Chapter 3 Installation & First Time Setup
3.1 Hardware Installation
Please follow the steps below to properly connect the Capture Box and your TV / STB.
Step 1
Connecting the Capture Box to Your STB Using Component Video Cable
Connect one end of the component video cable to the COMPONENT VIDEO IN port on the rear of the
Capture Box and the other end to the COMPONENT VIDEO OUT (colored red, green, and blue) port
on the STB.
z Before making the connections, make sure to set STB’s video output to “Component” and adjust its output
resolution to 1080i or below. Then power your STB off.
z If you would like to install internal hard drive, install it before making the connections.
z Make sure that the cables are firmly connected and that neither of the cables are loose. If any of the cables are
loose or disconnected, there may be a loss of signal or screen color problems.