ENGLISH
3
Name
Function
(2) USB Flash Drive port
Insert a USB flash drive for audio video recording.
(3) Power button
Turn the unit on/standby mode.
R e a r P a n e l
(3)
(1)
(2)
(
fig. 1.3
)
Name
Function
(1) DC12V / LIGHTBOX port
Connect the power adapter into this port.
(2) DVI-I
OUTPUT
port
Connect the AVerVision355AF to any display device with DVI
cable.
If the display device does not support DVI-I, you can only
view in Camera and Playback mode.
(3) RGB
OUTPUT
port
Connect the AVerVision355AF to any display device with
RGB cable
L e ft P a n e l
(1)
(7)
(5)
(6)
(4)
(3)
(2)
(
fig. 1.4
)
Name
Function
(1) Mini USB port
Connect to a USB port of a computer with a USB cable and use
AVerVision355AF as a USB Camera or transfer the captured
images/videos either from the memory source to computer.
(2) RGB INPUT port
Input the signal from a computer or other sources and pass it
through to the RGB OUTPUT port only. Connect this port to the
RGB/VGA output port of a computer.
(3) MIC
port
Connect a 3.5mm plug microphone. The built-in mic will be
disabled when an external MIC is connected to this port.
(4) Speaker
port
Connect to an amplified speaker to playback recorded audio &
video clip.
(5) RS-232/CVBS
port Connect the supplied RS-232/CVBS cable into this port. The RCA
jack outputs the video signal from the camera to a TV or video
equipment. The RS-232 jack is used to connect to computer serial
port or to any control panel or for centralized control if desire.
