4
Chapter 2 Hardware
Installation and
Setup
The AVerKey3 Plus Back Panel
The ports on the back panel of the
AVerKey3 Plus
are for connecting the
converter to the system unit and graphics display monitor. The figure and
descriptions below specify what device should go into each port. (Text
describing each port are printed at the bottom side of the converter.)
POWER (7.5V)
: Plug the
AC Power Adapter
to this port.
VGA IN
:
For IBM PC or compatible :
This port connects the
AVerKey3 Plus
to the IBM
compatible PC’s VGA port via the supplied
VGA Cable
.
For Macintosh :
This port connects the
AVerKey3 Plus
to the Macintosh
computer's monitor port. Use the supplied
VGA Cable
and Mac VGA Adapter
to connect.
VGA OUT
:
The computer monitor should be connected to this port.
You need to use the supplied
Mac Monitor Adapter
to
connect the Macintosh monitor.
