AVERATEC All-In-One PC, Руководство пользователя

Страница: 34 / 47

25 Chapter 3 System BIOS SETUP
Set up Password
1. On the initial System Setup screen, Go to Change Supervisor Password, and then press <Enter>.
2. On the following screen, enter the password and then press <Enter>.
Then enter the same password again and press <Enter>.
Enter New Password Confirm New Password
3. If you entered the correct password, the following window will appear. Press <Enter>.
The Supervisor Password is at a higher level than the User Password.
This completes setting up a password.
Password installed
[OK]
Supervisor Password is
Shows the setup status of the Supervisor Password: Installed, if a upervisor Password is set, or Not Installed.
User Password is
Shows the setup status of the User Password: Installed, if a User Password is set, or Not Installed.
Change Supervisor Password
Setting up a password helps you prevent unauthorized users from accessing the system. In the factory settings, password
is Not installed. A password can have up to six alphanumeric characters and/or numbers.