AVERATEC 6100A, Руководство пользователя

Страница: 89 / 93

89
n
IEC61000-4-11:2001
n
EN50082 (IEC801-2, IEC801-3, IEC801-4) Electro-magnetic
Immunity
n
EN 300 328-2, EN 300 328-1, EN 301 489-1, EN 301 489-17 (ETSI
300 328, ETSI 301 489) Electro-magnetic Compatibility and Radio
Spectrum Matter.
n
TBR21 ( ETSI TBR21) Terminal Equipment.
n
EN60950 (IEC950) I.T.E. Product Safety
Canadian Notice
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the radio interference
regulations of the Canadian Department of Communications.
Le present appareil numerique nemet pas de bruits radioelectriques
depassant les limites applicables aux appareils numeriques de Classe B
prescrites dans le reglement sur le brouillage radioelectrique edicte par le
Ministere des Communications du Canada.
Power Cord Requirement
The power cord supplied with the AC adapter should match the
plug and voltage requirements for your local area. Regulatory
approval for the AC adapter has been obtained using the power
cord for the local area. However, if you travel to a different area and
need to connect to a different outlet or voltage, you should use one
of the power cords listed below. To purchase a power cord
(including one for a country not listed below) or a replacement ac
adapter, contact your local dealer.
U.S. and Canada
n
The cord set must be UL-Listed and CSA-Certified or C-UL Listed.
n
The minimum specifications for the flexible cord are (1) No. 18 AWG,
(2) Type SJ, and (3) 3-conductor.
n
The cord set must have a rated current capacity of at least 10 A.
n
The attachment plug must be an earth-grounding type with a NEMA
5-15P (15A, 125V) or NEMA 6-15P (15 A, 250V) configuration.
Japan
n
All components of the cord set (cord, connector, and plug) must bear
a `PSE` mark and registration number in accordance with the
Japanese Dentori Law.
n
The minimum specification for the flexible cord are: (1) 0.75 mm
2
conductors, (2) Type VCT or VCTF, and (3) 3-conductor.