manualshive.com logo in svg

AVERATEC 2500 Series, Руководство пользователя

Поделиться
Скачать
AVERATEC 2500 Series Скачать руководство пользователя страница 45

Customizing this Notebook

3-6

Express Card Installation

Your notebook has a built-in Express Card slot. The new Express Card interface is smaller and

faster than PC Card interface. The Express Card technology takes advantage of the scalable,

high-bandwidth serial PCI Express and USB 2.0 interfaces.

The following instruction provides you with a basic installation for the Express Card, including

how to install and remove it. For more information, please refer to the manual of your Express

Card.

Installing the Express Card

1. Locate the Express Card slot on your notebook. If there is the dummy card in the slot,

remove it first.

2. Insert the Express Card into the slot (usually with its label facing up) and push it until it is

firmly seated.

Removing the Express Card

1. Press the edge of the Express card to make the card stretch out a bit.

2. Pull the Express card out of the slot.

3. Reattach the dummy card back to the slot.

Содержание 2500 Series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды