14
Setup Multi-people Detection
Define the area as a multiple people detection area. The camera will move to preset 2 and stop tracking
the original object until the multi-people detection mode is stopped.
[Note]
The effective zone setting is based on the panoramic camera view.
1. Select
>
Tracking setting
>
Wide Area
>
Multi-people detection
.
2. Select
“
Select effect zone
” to set the multiple people detection area. An online tutorial will display.
Click
Skip
to stop tutorial. To watch again, select
to play online tutorial.
3. In the
“Select effect zone” screen, drag and set the area to be the designated multiple people
detection area (an orange frame will show on screen). To re-set the area, just drag again. Select
“
Save
” to save the setting.
Содержание TR320
