8
Focusing the IP Camera with BNC Monitor
The IP camera is supported with BNC analog video out jack which allows you to connect an
analog display devices such as an LCD BNC monitor for you to adjust the camera focus
and zoom.
1. Connect the LCD BNC monitor to the BNC jack.
VIDEO IN
BNC PO
R
T
LCD BNC Monitor
2. Open up the IP camera case.
3. Slightly loosen the focus and zoom
control knobs and adjust the focus and
zoom range. Slightly tighten the focus
and zoom knobs once you are done
adjusting.
Zoom Knob
& Control
Focus Knob
Focus Control
