20
Wide Area Mode
The / will start tracking when object enter the priority zone and the face of
object is detected.
Setup Priority Zone
If / detects motions in the defined zone and / will be triggered
to track. If priority zone doesn’t setup, then, all the panoramic view will be the default active zone.
[Note]
The screen of priority zone setting is based on panoramic camera view.
1. Select
>
Tracking setting
>
Wide Area
>
Select priority zone
.
2. An online tutorial will display. User can watch to learn how to setup tracking zone. Click
Skip
to
stop tutorial. To watch again, select
to play online tutorial.
3. In Select priority zone screen, drag and select the area that wants to be tracking (a blue frame will
show on screen). To re-select the area, just drag and select another wanted area.
4. Click “
Save
” to save the setting.
Содержание PTC115+
Страница 1: ...PTC500 PTC115 User Manual ...
Страница 24: ...17 Enable Tracking Function Turn on and off the tracking function Select Tracking setting Tracking on ...
Страница 47: ...40 3 Use and buttons go to Information to check the IP address information ...
Страница 69: ...62 Visca over IP Settings ...