3
Using the supplied RJ-45 ethernet cable, connect one end to the LAN port on the codec and the other end to your
network. Make sure to connect to an IP-based network.
Connect the power adapter to any standard 100V~240V AC power outlet, then plug the power into the system. Only
use the supplied 19V power adapter to apply power to the video conferencing system.
If you plan to use external speakers (and not the HDMI cable for audio), connect them to the back of the codec using
the 3.5mm AUDIO OUT port. Powered speakers are recommended when using an external speaker system.
If you plan to use an external or auxiliary mic, connect it to either the 3-pin mini XLR port on the codec labeled AUX
MIC IN, or the 3.5mm AUDIO IN port. Please note that when using a mic on either of these ports, it will disable any
microphones plugged into the red MIC IN port. A powered mic is required when using the 3.5mm audio input.
6. Connecting external speakers (optional)
7. Connecting an auxiliary microphone (optional)
Contact Support
Tel: (877)528-7824
Email: [email protected]
www.averusa.com/communication
©2011 by AVer Information Inc. All rights reserved.
No part of this document may be reproduced or transmitted in any form, or by any means without the prior written permission of AVer
Information Inc. AVer Information Inc. reserves the rights to modify its models, including their characteristics, specifications, accessories and
any other information stated herein without notice. The official printout of any information shall prevail should there be any discrepancy
between the information contained herein and the information contained in that printout. “AVer” is a trademark owned by AVer Information
Inc. Other trademarks used herein for description purpose only belong to each of their companies.