English-3
LED Indicator
Solid blue:
Power on
Solid red:
Start-up
Solid orange:
Only power cable connected
Solid blue:
Video on
Solid white:
USB cable is connected but camera doesn’t have any streaming out
Flash orange:
Manually update FW
Gesture control
Blue light blinks for 2 seconds
: Successfully wake up gesture control function by any
valid gesture command
Blue light blinks for 4 seconds
: Camera recognizes a valid gesture command and
start to action.
[Note]
The default of gesture control is off. Please enable it via PTZApp 2 or IP web
page. The effective distance is up to 5-meter away from the camera.
Installation
1. Connect the camera to the power outlet.
Power cord
2. Connect the necessary cables.
[Notes]
Secure the USB and RS-232 cables with
attached screws.
Make sure the cable is well connected to
the connector on the camera before
securing the cable.