Mooney M20 series
Installation Instructions
AVE-MOD-012-INS
Issue 02
__________________________________________________________________________________
Aveo Engineering Group
, s.r.o.
Drasov 202, 261 01 Drasov
Czech Republic
Issue of form 01
Page 21 of 21
Part 2
Compliance demonstration
This document is in relation to the certification program AVE-MOD-012-PFC.
The compliance is demonstrated for the following certification specification:
Requirements
MoC
Statement of Compliance
CS 23.2500
General requirements
on systems and
equipment function
MoC 0
CS 23.1301
(a) All navigation and anti-collision lights are ETSO
certified. All landing lights are qualified according to
RTCA DO160 as per AVE-H30-001-CCL.
(b) Not applicable as no changes are made which
would require a changed or a new label.
(c) All equipment is installed within their limits.
(d) It has been proven in other installation and by
the qualification data that all equipment is
functional for the intended purpose. Additionally the
proper function is determined in a functional check
as per MCS.
CS 23.1309
(a) All products have been tested to the appropriate
environmental standard. In addition to that
improves the new light installation the mean time
between failure by a factor of about 1000. All lights
are brighter at a lower power consumption and a
much lower temperature.
CS 23.2625
Instructions for
Continued
Airworthiness
MoC 0
CS 23.1529
The modification includes a supplement to Mooney
Aircraft Maintenance Manual (AMM) modified by
Aveo Modification “AVE MOD 012”.
