Page|9
www.avenview.com
4.
IR REMOTE FUNCTIONS
FUNCTION KEY
FUNCTION DESCRIPTION
POWER
N/A RESERVED
N/A RESERVED
N/A RESERVED
SOURCE SELECT 1
SELECT
HDMI INPUT 1
TO BE THE INPUT SOURCE
SOURCE SELECT 2
SELECT
HDMI INPUT 2
TO BE THE INPUT SOURCE
SOURCE SELECT 3
SELECT
HDMI INPUT 3
TO BE THE INPUT SOURCE
SOURCE SELECT 4
SELECT
HDMI INPUT 4
TO BE THE INPUT SOURCE
4.
INSTALLATION (SW-HDM-4x1)
To setup Avenview SW-HDM-4X1 please follow these steps for connecting to a HDTV/MONITOR
1.
Turn off all devices including HDTV/MONITOR
2.
Connect 1-4 sources to the INPUTS ports of the SW-HDM-4x1via HDMI cable.
3.
Connect to a HDTV/Monitor via HDMI cable
4.
Plug in 5V 1A DC Power (supplied) to the SW-HDM-4x1. (There is no power switch. Power is
supplied when the power adapter is plugged into wall outlet.
5.
Power on the HDMI display.
6.
If you need to extend the HDMI signal further than 30ft, you may need to use an HDMI Extender
(HDM3D-C5IR-SET,HDM3D-C53X-SET)
