Avenview SC-HDM2-T4KHD, Инструкция по эксплуатации, Страница: 6 / 16

The SC-HDM2-T4KHD scaler with HDMI 2.0a and HDCP 2.2 Support is a device that can solve EDID
(Extended Display Identification Data) information problems within any system design when different devices with varying
resolutions are connected. With its own control software supplied the user can simply store and recall a default EDID
informatio
n , also supporting EDID Re-timer / EDID Recorder setting in non-volatile memory and supports HDCP handshaking.
SC-HDM2-T4KHD allows your HDMI source to boot directly from EDID Reader/Writer/Re-timer mode. This feature allows
the user to easily remove the monitor at any time while installing SC-HDM2-T4KHD between HDMI source and monitor.
Also using the control software user can read , store and modify the EDID of any HDMI/DVI display upload the modified EDID
to displays.
Bonus Feature -Has the abilty to handle many differnt chroma sampling such as 4:2:0, 4:2:2 and 4:4:4

HDMI 2.0a compliant

Supports 4K2K@60 4:4:4 8bits

Supports HDR*, which is 4K2K@60 4:2:0 10bits**

HDCP 2.2 compliant

Supports resolution upscaling from 1080p to 4K2K or downscaling from 4K2K to 1080p (No frame rate conversion)

Supports HDMI signal bypass

Simultaneous HDMI output

Able to read and store the EDID of displays (monitors or projectors)

Able to overwrite the EDID into the EDID Reader/Re-timer or the HDMI displays

Built-in default EDID

Able to maintain HDMI/DVI video resolution

Re-synthesizes input HDMI stream and maintains or improves signal integrity.
2. INTRODUCTION
3 . FEATURES
www.avenview.com
Page
3
*
HDR = High Dynamic Range.
** The video bandwidth of 4K2K@60 4:2:0 10bits (HDR) is 384 MHz, and the 4K2K@60 4:4:4
8bits is 594MHz.
Extended Display Identification Data (EDID) is a standard data format that contains basic information about a monitor
and its capabilities, including vendor information, maximum image size, color characteristics, factory pre-set timings,
frequency range limits, and character strings for the monitor name and serial number.
The information is stored in the display and is used to communicate with the system through a Display Data Channel
(DDC), which sites between the monitor and the PC graphics adapter. The system uses this information for
configuration purposes, so the monitor and system can work together.
NOTE
PC SOFTWARE MUST BE USED FOR THE FIRST TIME TO ASSIGN HDMI PORTS
TO SCALE OR BYPASS

Supports 4K2K or 1080p or 720p bypass

Supports 4K downscale to 1080p or upscale 1080p to 4K