Avenview KPD-TCP1US-8, Руководство по эксплуатации продукта, Страница: 17 / 24

4.2 MACRO SETTINGS (CONT)
4.2.2 Command Select Menu
The ‘Command Select’ menu allows you create commands to be executed as part of a macro. Available
commands include changing the LED backlight of specific buttons (to indicate a macro has executed),
issuing Telnet commands to connected network devices and to control the output of the built-in relay.
Commands can be selected from a pre-defined list or from user created commands. User created
commands are defined in the “Command Settings” tab. See Section 4.4 for more details.
Selecting a command opens the ‘Set Destination’ menu. All commands may be configued with a delay,
interface and detination IP if applicable. The image below shows the settings available for a Telnet
command.
Delay: The delay before the next command is issued. Measured in milliseconds.
Interface: Method of communication for the command.
Available interfaces include: Device (Telnet commands to a pre-defined device), TELNET (Telnet
commands to a specified IP address), SysCMD (For keypad commands including LED control) and Relay
(For controlling the built-in relay)
Note:
It is strongly suggested to not set a delay time less than 100ms for system commands or less than
500ms for Telnet commands to ensure that the command is properly received and executed before the
next command is sent.
Rev.00 12/2017
www.avenview.com
14