www.avenview.com
8
1.9
Installation
1.
To setup Avenview HDMI-C5-IR-SET follow these steps for connecting to a device:
2.
Connect your HDMI / DVI source (such as a DVD player) to the transmitting unit (HDMI-C5-IR-S).
3.
Connect the IR transmitting cable to the transmitter (HDMI-C5-IR-S), and make the IR emitter directly
point to the IR of HDMI source.
4.
Connect your HDMI / DVI display (such as a LCD TV or plasma TV) to the receiver (HDMI-C5-IR-R).
5.
Connect the IR receiving cable to the receiver (HDMI-C5-IR-R), and make the IR receiver directly point
to the user.
6.
Make sure CAT-5/5e/6 LAN cable is tightly connected and not loose.
7.
Plug in 5V DC power cord to the power jack of the receiving unit HDMI-C5-IR-R.
8.
Plug in 5V DC power cord to the power jack of the transmitting unit HDMI-C5-IR-S.
1.10
General Troubleshooting
Problem
Possible Solution
No Image
Check if connection to the source and the display are correct.
Ensure that display device supports 480p, 720p and 1080p
resolution
Screen Defects Appear
This product supports up to 1080p (1920x1200) resolution.
Check the DVI and HDMI connection
If outputting from a PC. Check the maximum resolution range
of the graphics card.
If a flickering or a blinking image is seen, try to adjust the rotational switch to improve the cable
skew. 0 stands for the strongest EQ while 7 stands for the weakest. Try adjusting the EQ from 7 to 0
