www.avenview.com
7
2.3
Panel Description
FRONT PANEL & REAR PANEL (Transmitter, HDM3D-C5IR-S)
1. MODE:
Rotary dial A-H for video transmission (See
Table Below)
5. IR BLASTER:
Infrared 3.5mm socket for plugging in
the extension cable of IR blaster
2. DIP SWITCH
: Setup the RS-232 mode for serial
communication channel
6. RS-232:
Connect to PC Serial Port with a D-SUB-9
male-male cable here
3. HDMI IN:
Connects to a HDMI source with a HDMI
male-male cable
7. +5V DC:
Connect to 5V DC power supply.
4. IR RECEIVER:
Infrared 3.5mm socket for plugging
in the extension cable of IR receiver
8. HDMI SIGANL OUT:
Plug in a Cat-5E/6 cable that
needs to be linked to the receiving unit
MODE on Transmitter
A
VIDEO
EDID Full-HD(1080p@60)
- 24bit 2D video
AUDIO
Supports up to 7.1 Channel
Output
B
VIDEO
EDID Full-HD(1080p@60)
- 24bit 2D video
AUDIO
Locks to Stereo Audio Output
C
VIDEO
EDID Full-HD(1080p@60)
- 24bit 3D video
AUDIO
Supports up to 7.1 Channel
Output
D
VIDEO
EDID Full-HD(1080p@60)
- 24bit 3D video
AUDIO
Locks to Stereo Audio Output
E
VIDEO
EDID HD(1080p@30)(1080i@60)
(720p@60) - 24bit 2D video
AUDIO
Supports up to 7.1 Channel
Output
F
VIDEO
EDID HD(1080p@30)(1080i@60)
(720p@60) - 24bit 2D video
AUDIO
Locks to Stereo Audio Output
G
VIDEO
EDID Full-HD(1080p@60)
- 36bit 2D video
AUDIO
Locks to 7.1 Channel Audio
Output
H
EDID Learning
Auto EDID learning
1
2
3
4
5
6
7
8
