Page
10
4.2
INSTALLATION (HDM2-SPLITPRO-T4K-V2) with PC Control Software
Control through RS-232 port / Ethernet port
1.
Please note when power cycling device, please restart unit at least 5 to 15 seconds after to allow the power
capacitors to discharge.
2.
The HDM2-SPLITPRO-T4K-V2 PC control software operates with Microsoft Windows 98, 2000, XP, 7, 8
through the interface of Ethernet or RS-232 serial control.
3.
Through software and COM port you can assign an IP address before connecting via RJ45.
Please NOTE: (Under Microsoft Windows 7, please run software as administrator).
Once the software is installed click on the ICON, the following dialog will pop-up. First time connection,
please connect via RS232 serial cable.
RS-232 serial Mode: Use RS-232 to connect the port on device and computer. Select the correct COM port and
click the OK button.
Ethernet Mode: Enter the IP address of the device and click the OK button and power cycle the unit.
