3
7
2.4.
3
FRONT PANEL (Receiver/Decoder, HDM-C6MWIP
4K
-R)
1.
Power LED: Indicates if the unit is power
e
d OFF or ON by a RED LED.
2.
Status LED: Steady Blue Light ON indicates unit is communicating properly. LED blinking waiting on Encoder.
2.4.
4
FRONT PANEL (Receiver/Decoder, HDM-C6MWIP
4K
-R)
1
2
4
5
6
7
8
10
www.avenview.com
Rev. 00 - 10/2017
4
.
HDMI OUT: Connect to display.
5
.
6
.
Stereo Audio OUT: Connects to an audio output
device such as an amplifier for audio de-embedding.
7
.
CAT5/6: Used for transporting video/audio streams
to decoder RX units connected.
8
.
RS 232-2: RS-232 Data pass-through port for
receiving /sending commands to RS 232 controllers.
9
.
Power Jack: DC 12V 1A
Reset Button: Reboots the device. Hold down for
5 seconds on power up to restore factory defaults
10
.
RS 232-1:
Debug use
9
3
.
PUSH Button
:
To activate the internal ID of the unit to be displayed on the display
.
For easy Decoder identification
