Avenview HDM-C6IP-S, Руководство пользователя

Страница: 11 / 16

www.avenview.com
Page 8
3. INSTAllATION
please ensure all the package contents are all received.
To setup Avenview HDM-C6Ip-SET follow these steps for connecting to a device:
1. Connect your HDMI source (such as a Blu-ray Disc player) to Transmitter (HDM-C6Ip-S).
2. Connect your HDMI display (such as a lCD Tv) to the receiving unit HDM-C6Ip-R.
3. Connect your CAT-5E/6 follow the standards of TIA-568BlAN cable between the transmitting and receiving units.
4. Make sure CAT-5E/6 lAN cable is tightly connected and not loose.
5. plug in 5v DC power cord to the power jack of the transmitting unit HDM-C6Ip-S
6. plug in 5v DC power cord to the power jack of the receiving unit HDM-C6Ip-R.
4. GENERAl TROuBlESHOOTING
PROBLEM
POSSIBLE SOLUTION
NO IMAGE
• Check if connection to the source and the display are correct.
• Ensure that display device supports 480p, 720p and 1080p resolution
SCREEN DEFECTS
APPEAR
• Check the DVI and HDMI connection
YELLOW LIGHT ON LAN PORT
FLASHING SLOW
• Check both units and make sure the TX and RX are not Reversed
• Check the source device is powered ON
YELLOW LIGHT ON LAN PORT
FLASHING FAST/NO IMAGE • Check Graphics card on PC. This product supports up to 1080p
(1920x1080) resolution.
NO YELLOW LIGHT ON LAN
PORT
• Check Network cable only use TIA-568B Standard
• Network cable run is out of range