www.avenview.com
Page 6
2.4.3 DIP Switch for EDID & Audio/Video Setting
DIP Switch
Position
Video
Audio
Description
PIN # 1
PIN # 2
Off
Off
1080p
Stereo
1
Default Mode
2
: up to 1080p & Stereo output.
Off
ON
720p/1080i
Stereo
Safe Mode
3
: forces system to output at 720p/1080i
with Stereo Audio.
ON
Off
Bypass
4
Bypass
EDID Learning Mode
5
: for learning EDID from the
display while playing any received HDMI Audio format.
ON
ON
Bypass
Stereo
EDID Learning & Stereo Mode: for learning EDID
from the display while enforcing stereo output.
1. If the HDTV shows video but without audio, please try to set audio mode to stereo
2. Factory default: Pin#1-OFF[
], Pin#2- OFF[
] for 1080p with stereo.
3. If you encounter any unsolved audio/video output problem during system installation, please turn to Safe
Mode (Pin#1-OFF [
] & Pin#2-ON [
]) to enforce the most compatible 720p stereo output for system
check.
4. Bypass means the matrix will maintain playing the original format of HDMI signals in video and perhaps
audio. By setting at this mode, the users may encounter compatibility issue among different kinds of
HDMI sources and displays. If you cannot get the audio and/or video output normally at the system
installation, please change the DIP switch setting to default mode or even safe mode to verify the
functionality of the device.
5. Set Pin#1 at ON [
] first then connect the HDMI Input to HDTV through a HDMI cable. Wait for 20
seconds. The EDID learning procedure will be finished. If you want to learn the EDID from another HDTV,
you must set Pin#1 at OFF [
] first and repeat this procedure.
3.
INSTAllATION (HDM-C5XD-S)
To setup Avenview HDM-C5XD-S please follow these steps for connecting to a device:
1. Turn off all devices including monitors / TV
2. Connect a local HDMI display to the HDMI out of the HDM-C5XD-S and then connect a speaker to the 3.5mm audio
socket.
3. Connect to a HDMI source (such as a Blu-Ray Disc player)
4. Connect HDM-C5XD-S to HDM-C5XD-SR or HDM-C5-3-R from CAT5 Out with CAT5 / CAT6 cable
5. plug in 5V 4A DC power (supplied).
6. power on the HDMI display
7. power on HDMI Sources.
