www.avenview.com
Page 6
3.
INSTALLATION
To setup Avenview HDM-AVXWALL follow the steps outlined below for connecting to a device.
1.
U
se the best quality DVI, DVI-HDMI, VGA, Composite, S-Video cables.
2. Turn Off HDM-AVXWALL and all devices that are to be connected to it.
3. Connect DISPLAYS (or projectors, TV or other display devices) to OUTPUT interfaces of HDM-AVXWALL.
4. Connect the Source device (such as, pC, DVD player, or Media player etc.) to
HDM-AVXWALL.
5. Connect a Windows based laptop or desktop (that will used to configure the
HDM-AVXWALL
) to
HDM-AVXWALL
by RS-232 to uSB Adapter.
6.
P
ower ON
HDM-AVXWALL
.
7. Turn ON all devices connected to
HDM-AVXWALL
and then setup the
HDM-AVXWALL
from the system
through
RS-232 to
U
SB Adapter and provided Avenview software.
- DO NOT block the
back
of this device or stack another device on the top or bottom of the
HDM-AVXWALL
If
the
unit
is
blocked it will block the air flow from the fans on the side of the unit. This could cause system to
over-heat, which may result in system failure.
Содержание HDM-AVXWALL
Страница 10: ...www avenview com Page 7 4 APPLICATION DIAGRAM...
Страница 33: ...www avenview com Page 30 Notes...
Страница 34: ...www avenview com Page 31 Notes...