Avenview HBT-C6POE-SP4, Руководство пользователя

Страница: 6 / 20

www.avenview.com
Page 3
2. INTRODuCTION
The Avenview HBT-C6pOE-Sp4 HDBaseT 1x4 HDMI CAT5/6/7 Splitter with pOE, Bi-Directional IR and Ethernet has been
designed to extend High Definition video and multi-channel digital audio formats to (4) four Monitors.
Video Signals: 4K2K@30 (ultra HD), 3D, Deep Color, and full HD 1080p 48-bit color depth.
Audio signals: lossless Multi-channel audio formats (DTS-HD Master Audio, Dolby TrueHD.
Data Signals: Bi-Directional IR signals 30 KHz to 50 KHz over CAT5/6.
The HBT-C6pOE-Sp4 includes (1) one unit: Transmitting unit (Tx) HBT-C6pOE-Sp4 with (3) Three uTp output ports and (1)
HDMI output port which allows the user to extend video and audio via HDMI cable 35ft.
The bonus features with this device it can support poE (power over the CATx cable to the RX) also Internet (100Mbps Ethernet
service when connected to a Router). These features has been added to this unit to give the installer and user a complete
solution with the new trends in online streaming, network connected devices and new demand in Smart TV, ultra HD monitors
and content. The HBT-C6pOE-Sp4 allows bi- directional IR control of the source connected to the unit from the users IR
remote control at the monitor side.
- INpuT: HDMI with 3D & 4Kx2K, 1080p, HDCp and DVI compliant source devices
- DATA RATE: from 250Mbps up to 3Gbps
- pC RESOluTIONS: up to VGA to WuXGA
- HD RESOluTIONS: up to 4Kx2K (3840x2160@30Hz and 4096x2160@24Hz)1080p (1920x1080@60Hz)
- AuDIO SuppORTED: lpCM 7.1CH, Dolby TrueHD, Dolby Digital plus and DTS-HD Master Audio
- AuDIO TRANSMISSION: (32-192kHz sample rate)
- DISTANCE: up to 100 meters through CAT6e/6a/7 cables
- ETHERNET TRANSMISSION: Rate up to 100Mbps
- MODE: Standard 1080p@60Hz or TV EDID timing
- SERVICE: uSB for Manufacturer uSE ONly
- 3D SuppORT: follow by Display / TV’s EDID
- pOE SuppORT: ONly with capable Receiver (Rx units)
- IR CONTROl: Bi-directional IR Control
- NOTE:
- The poE function is designed for powering compatible Receiver units only.
- The non-poE Receivers has to be powered with a power supply.
- Receivers (Rx) from different manufactures would not be compatible.
- Displaying HDMI 4Kx2K resolution would require the standard 4Kx2K HDMI cable and display for accurate results.