Avenview HBT-C6POE-SET, Инструкция по эксплуатации, Страница: 11 / 20

www.avenview.com
Page 8
4.3 INPUT PANEL (Receiver, HBT-C6POE-R) Front
10. HDMI OuT: Connect
to HDMI display Max
35ft via HDMI Cable or
cascade with another
Avenview type Trans-
mitter 11. lAN OuT: Connect to a lAN equipped device (such as a smart
TV or games console) to share the network/internet access.
Warning:
DO NOT connect the lAN connection to the CAT5e/6/7 output,
this may trigger a power shut down and may damage the device.
12. RS-232 OuT: Connect to a device that has the ability to Receive control commands via RS232 only with
compatible Transmitters.
4.4 INPUT PANEL (Receiver HBT-C6POE-R) Rear
13. IR 2 Blaster: plug the IR Blaster cable for IR signal being
transmitted. place IR Blaster within direct site of the
device being controlled. 14. IR 1 Extender: plug the IR Extender cable for IR sig-
nal being received. place IR Extender within direct
line of site with the IR Remote.
15. lINk lED: Illuminate when both the input and output
signals are in sync. The lED will blink intermittently to
indicate no signal is being received from the display and
irregularly to indicate that an error has occurred. 16. CAT5e/6/7 IN: Connect CAT5e/6/7 cable to trans-
mit all data signals extend the signal from the TX
unit.
10
13 14 15 16
11 12