COMMAND
DESCRIPTION
S HUE 0~60
Sets the numerical value for the HUE setting
(
0~60
)
R HUE
Reports the numerical value for the HUE setting
Sets the numerical value for the SATURATION
setting (
0~60
)
S SATURATION 0~60
R SATURATION
Reports the numerical value for the SATURATION
setting (0~60)
Sets the numerical value for SHARPNESS setting
(0~30)
S SHARPNESS 0~30
R SHARPNESS
Reports the numerical value for the SHARPNESS
setting (0~30)
S NR 0~3
0=OFF
2=MIDDLE
1=LOW
3=HIGH
R NR
Reports the numerical equivalent for the NOISE
REDUCTION setting (as listed above)
S AUDIO DELAY 0~3
0=OFF
2=110ms
1=40ms
3=150ms
R AUDIO DELAY
Reports the numerical equivalent for the AUDIO
DELAY setting (as listed above)
S AUDIO MUTE 0/1
R AUDIO MUTE
0=ON
1=MUTE
Reports the numerical equivalent for the AUDIO
MUTE setting (as
listed
above)
FW
Checks the FIRMWARE version
S RESET 1
Sets the numerical equivalent for the RESET
setting (as left)
Note:
1. RS-232 commands will not execute unless followed by a carriage
return and LF (Line Feed).
2. Commands are not case-sensitive.
3. Resolutions 1~16 are RGB encoded and 17~25 are YUV encoded.
www.avenview.com
Page 11
0=ENABLE
1=DISABLE
S KEY LOCK 0/1
R KEY LOCK
Reports the numeric equivalent for the KEY
LOCK setting (as listed above)
S AUTOSCAN 0/1
0=DISABLE
1=ENABLE
R AUTOSCAN
Reports the numeric equivalent for AUTO SCAN setting
(as above)
