www.avenview.com
Page
8
5.
IR CABlE DEfINITION
IR Sockets
IR BlASTER: plug in the IR blaster to the HBT-C6pOE-R to emit all IR command signals received from the IR Extender plugged
into the TX. IR1 Blaster on TX receives IR from IR1 Extender on RX. IR2 Blaster on RX receives IR from IR2 Extender on TX.
to control the devices corresponding to the IR signals. Example: Set Top Box or DVD player (The Source).
IR EXTENDER: plug in the IR Extender into the (RX) Receiver (Monitor Side) to receive all IR command signals from the IR
remote controls of the corresponding source.
Example: Set Top Box or DVD player (IR Remote Control).
NOTE: Incorrect placement of IR Blaster and IR Extender into the extender may result in the failure of the IR
extenders.
Please check carefully before plugging in the IR extender to the respective IR sockets.
It is clearly marked and IR 1: IR EXTENDER /IR 2: IR BLASTER
WARRANTY WILL NOT COVER THE DAMAGE
power
3.3
V
IR Blaster Signal
NC
IR Signal
power
3.3
V
Grounding
1
2
3
1
2
3
