www.avenview.com
4
1.3
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4
Introduction
FO-DVI-1000X-EMIX, optical DVI extension module, is designed to let digital flat panel display signal extend
over 300 meters away from host based on DVI standard by optical transmission technology.
It can transmit EDID data and HDCP over fiber in real time. FO-DVI-1000X-EMIX can be used with DVI device
as well as HDMI standard device such as Blu-ray player, PS-3.
High speed and long distance transmission by 1 channel SC type multi-mode optical fiber
Supports resolution up to HDTV / 1080P, PC / WUXGA(1920 x 1200)
TMDS video signal and EDID data is transmitted over optical fiber
Uses slim and light Aluminum case
EMC & Safety : CE, FCC
External power supply for Transmitter is (optional). Automatic power switch is included.
1.5
Package Contents
Before you start the installation of FO-DVI-1000X-EMIX, please check the package contents.
-
Transmitter
x 1
-
Receiver
x 1
-
Power Adapter (5VDC, 2A)
x 1
User’s Manual
x 1
1.6
Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
