Avenview FO-DVI-1000M-EMIX, Руководство пользователя

Страница: 4 / 12

www.avenview.com 4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
Avenview FO-DVI-1000M-EMIX DVI Extender over Fiber lets you extend digital flat panel signal up to 500
meters (1650 feet) at 1920 x 1200 and 1000 meters (3300 feet) at 1280 x 1024 away from host by TMDS digital
signal and EDID transmission with only 1 fiber.
- High Speed and long distance transmission by SC type Multi-Mode 1 fiber
- R, G, B, Clock signal is transmitted by 1 Multi-Mode optical Fiber
- EDID data is transmitted by 1 Multi-Mode optical Fiber
- Supports 12bit deep color
- Standard DVI plug and SC Fiber connector
- Supports up to WUXGA (1920 x 1200) resolution
- HDCP compliant
- Optional external power supply (Automatic Power switch is included)
1.5 Package Contents
Before you start the installation of FO-DVI-1000M-EMIX, please check the package contents.
- Transmitter x 1
- Receiver x 1
- Power Adapter (5VDC, 2A) x 1
User’s Manual x 1
1.6 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.