Avenview DVI-VIDEOWALL-12X, Руководство пользователя, Страница: 19 / 24

www.avenview.com
Page 16
12.2 DVI-OuT
Supported Mode Resolution Supported Mode Resolution
(HDTV) 720P 1280x720 @50Hz VESA 1280x768 @60Hz
(HDTV) 720P 1280x720 @60Hz VESA 1366x768 @60Hz
(HDTV) 1080P 11220x1080 @60Hz VESA 1400x1050 @60Hz
VESA 640x480 @60Hz VESA 1400x1050 @50Hz
VESA 800x600 @60Hz VESA 1152x864 @75Hz
VESA 1024x768 @60Hz VESA 1600x1200 @60Hz
VESA 1152x864 @75Hz VESA 11220x1200 @50Hz
VESA 1280x1024 @60Hz VESA 11220x1200 @60Hz
VESA 1280x1024 @50Hz
13. GENERAl TROuBlESHOOTING
Problem Possible Solution
NO POWER
1. Check if AC power Cord is firmly plugged into DVI-VIDEOWAll-12X
2. If you are recovering from power Outage, leave the device Off for a
while and then power it ON again.
OFF-CENTER SCREEN IMAGE,
ODD COLORS OR NO PIC-
TuRE
3. Make sure all cables are in good working condition and properly connected
DVI-VIDEOWAll-12X.
4. Configure the Output video resolution so that it doesn’t exceed the
native supported resolution of TV/Monitor/projector (Display). usually a
message of “Out of Range” is display on TV/Monitor.
5. Every time you change the resolution of Input Source, wait 10 – 20
seconds. After the resolution is changed, the selection of Input and the
Display layout mode will return to default. Adjust the Input source and
Display layout Mode to your requirements again.
6. VGA Source can take up to 10 Seconds before it is recognized
POOR QuALITy VIDEO
7. We suggest you don’t use T-Connectors to split your video source into
images displayed on two difference screens. This lowers the Output video
quality. use a distribution amplifier instead of T-Connectors
8. Make sure the video source is not compressed and maintains the highest
native resolution
WRONG COLOR 9. press “Color Balance” key in “State” for auto configuration.
POOR LINkING
10. When the linking of the Serial Control cannot work, reboot DVI-
VIDEOWAll-12X to establish the link.