www.avenview.com
7
1.8
Installation
To setup Avenview C-VGA-HDM follow these steps for connecting to a device:
1.
Power off display source such as Laptop/PC
2.
Connect your VGA source to VGA input
3.
Connect Stereo Audio source to 3.5mm Jack respectively
4.
Connect Male to Male HDMI to HDMI Output of C-VGA-HDM
5.
Connect other end of HDMI cable to TV or projector with HDMI input
6.
Plug in 5V DC power cord to power jack of C-VGA-HDM
7.
Power on C-VGA-HDM
8.
Power on VGA source and display with HDMI input.
PLUG and PLAY; Also COMPATIBLE
Only HDMI enabled TV sets with underscan / overscan supported can display full active
video accurately. If underscan / overscan is NOT supported, the top, bottom, left and
right border of the active video may be screened.