Avenview 8X8 HDMI 1.3 over CAT5Matrix Switch with IR Pass-Through, Руководство пользователя

Страница: 14 / 21

www.avenview.com 14
1.10.2 Display Side
1.10.2.1Method A: Push Button
Press the INPUT SELECT push-in button to switch the input source on the respective output port connected to
the matrix receiver in sequential order. The selected input source will be displayed on the LED of INPUT
CHANNEL.
1.10.2.2Method B: IR Remote Control for Switching Input Channels
Please press F1 to F6, Enter ( ), and Exit ( ) button to enter IR control mode and decide which input
channel to be selected by pressing F1 to F6, Enter ( ), and Exit ( ) button, and wait a few seconds for
the input channel LED display to show the number of selected input source channel. Or you can use up
(

) and down (

) button to enter IR control mode and select the input channel in ascending and
descending order respectively.
F1 HDMI output #1
F2 HDMI output #2
F3 HDMI output #3
F4 HDMI output #4
Up (

) Switch output port in ascending order
Down (

) Switch output port in descending order
1.10.2.2Method C: IR Remote Control for Controlling the HDMI Sources
Users can use the corresponding IR remote to control respective DVD player or any HDMI compliant devices
including SW-HDMI-C5-4X4 itself with IR control at any display site.