Assembly Instructions - Important:
Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when
assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or
information on other products, please visit our website: www.avesix.com or call or write us.
Step 1
Features
1 - (Chair Body) - 1 Piece
2 - (Pneumatic Cylinder) - 1 Piece
3 - (Base) - 1 Piece
4 - (Caster) - 5 Pieces
1
2
3
4
1
2
IMPORTANT: Push hard until you feel or hear Caster (4) snap into place.
Place Chair Body (1) onto Pneumatic Cylinder (2) and apply downward pressure.
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1) up. To
lower seat height sit on chair and pull lever (1) up.
NOTE:
It is normal for chair to slightly lower under body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of the tilting
feature. Turn knob (2) clockwise to increase tension and counter-
clockwise to decrease or ease the tension. To lock, return chair to the
upright position and push lever (1) in. To unlock pull lever (1) out.
NOTE: Be careful not to loosen back tilt adjustment knob completely.
