Model Number MD-WT-ADV-24 User Guide
Page | 26 ©2018 Aventura Technologies, Inc. All rights reserved.
S
IGNAL
O
UTPUTS
In the Signal output interface (Figure 37), choose
whether alarms will be triggered or not. In the
example shown, if there is an alarm, there will be an
output signal since “Alarm ON” is selected. Use the
left and right buttons to select. No Alarm ON and
OFF are used when a device is connected internally
to a NO / NC alarm output device. (Optional feature).
S
OFTWARE
V
ERSION
The Version menu (Figure 38) displays the software
version and version ID. Press the Enter button or the
power button to return to the previous menu.
A
PPLICATION
T
YPE
The Walk-Through Metal Detector has some pre-
stored settings that may be used to deploy the
detectors rapidly, or as a starting point customize
the settings for your application. In this menu
(Figure 39), use the up, down, left and right buttons
to select a situation that approximates your
application. Press the Enter button to save the
settings and return to the previous menu.
Figure 38
Figure 37
Figure 36
