aventon Pace 350 V2, Руководство пользователя, Страница: 27 / 31

PACE 350/500 V2 uses 27.5’’ x 2.2’’ rubber tires with inner tubes. The tires are designed for durability and
safety for regular cycling activities and to be checked before each use for proper inflation and condition.
Proper inflation, care, and timely replacement will help to ensure that your bike’ s operational characteristics
will be maintained, and unsafe conditions avoided.
Aventon Bikes recommends 30-50 PSI (2.0-3.5 BAR) for the stock tires on PACE . Always stay within the
manufacturer’ s recommended air pressure range as listed on the tire sidewall.
Tire Information
Derailleur
On the right side of handlebar, next to the brake lever, you can see two levers with 7-1 gears(Pace 350 V2)/
8-1 gears (Pace 500 V2). Those are derailleur levers. By pressing those levers, you can make the chain move to
different gears to change your riding experience.
Your cables, spokes, and chain will stretch after an initial break-in period of 50-100mi (80-
160km), and bolted connections can loosen. Always have a certified, reputable bike mechanic
perform a tune-up on your Pace 350/500 V2 after your initial break-in period of 50-100mi (80-
160km) (depending on riding conditions such as total weight, riding characteristics, and terrain).
Regular inspections and tune-ups are particularly important for ensuring that your bike remains
safe and fun to ride.
26
It is critical important that proper air pressure is always maintained in pneumatic tires. DO
NOT underinfalte or overinflate your tires. Low pressure may result in loss of control, and
overinflated tires may explode. Failure to always maintain the air pressure rating indicated on
pneumatic tires may result in tire and/or wheel failure.
Inflate your tires from a regulated air source with an available pressure gauge. Inflating your tires
from an unregulated air source could overinflate them, resulting in a burst tire. Even tires
equipped with built-in flat-preventative tire liners, like those that come with bikes by Aventon
Bikes, can and do get flats from punctures, pinches, impact, and other causes. When tire wear
becomes evident or a flat tire is discovered, you must replace the tires and/or tubes before
operating the bike or injury to operators and/or damage to your bike could occur.
When changing a tire or tube, ensure that all air pressure has been removed from the inner tube
prior to removing the tire from the rim. Failure to remove all air pressure from the inner tube
could result in serious injury.
Using aftermarket tires or inner tubes, not provided by Aventon Bikes may void your warranty,
create an unsafe riding condition, or damage to your bike by Aventon Bikes. If required by law,
ensure replacement aftermarket tires have sufficient reflective sidewall striping.
For more information on tire or tube replacement procedures, or question about tire inflation, contact
Aventon Bikes Product Support.
Support link: https://support.aventon.com/contact-us or Call: 1-866-300-3311.