12
Step 4.
Make sure the handle bars stay on the left side so after the handle bars are installed the cables come
out of the frame to the left side of the bike. Make sure the cables are not twisted.
（
Reference below pic
,
For
Pace 350 & Pace 500 )
B.Place the handlebar stem onto the stem with the display facing upwards, replace the top cap and use a
5mm hex key to secure the handlebar stem. Reinsert the rubber cover back into the top cap.
Step 5:
Use 5mm hex key to remove all four stem faceplate bolts.
（
For Pace 500)
Rubber Cover
