www.factorybuysdirect.com
160946-03A
6
Figure 1 - Attaching Burner Assembly to
Tank Bracket
ASSEMBLY
3.
Read and follow all of the safety and
operating precautions.
4. Check the "O" ring on the POL before
each use. Replace "O" ring if there is any
sign of wear or damage.
5. Make sure heater regulator knob is in
the OFF position. If not, turn the heater
Control Knob counterclockwise to the OFF
position.
6. Attach the heater to the guard on the
propane cylinder as shown in Figure 1.
Tighten knob on tank bracket to secure
heater.
7. Insert regulator's connector into the
tank valve connection and turn counter-
clockwise
until tight.
Machine Screw
Tank Collar Bracket
Mounting Bolt Knob
Thermocouple
Tip Switch
Hand Nut
Control Knob
Mounting Plate
Check for the following items:
Burner Head/Element
Tank Collar Bracket
Check all heater parts for damage. If
any heater part is damaged, promptly
inform dealer where you bought
heater.
the propane tank
1. Align bolt holes in tank collar
bracket with bolt holes in mount-
ing plate on heater.
2. Drive-in two machine screws
(supplied) into the bolt holes
attaching tank collar bracket to
mounting plate
8. Securely tighten all gas connections.
9. Open the cylinder's gas valve and
check all connections for leaks. Apply
gas joints. Bubbles forming show a leak
that must be corrected.
DO NOT USE A
FLAME.
