Aven 26700-136, Руководство пользователя

Страница: 11 / 15

11
System set up
Example of system setup when the system Software is used:
Measuring
Put your object under the camera.
Zoom to preferable magnification with the software. (Notice, if the remote is used, no
updates in Zoom factor will occur in the software and will else calculate wrong when
measuring.)
Press the draw button. Press LB (Left button) on your mouse and make the start point, then
go to your next measuring point and release the button the measure value will occur on the
screen.
Text: Press T and go to the location where you want to insert the text, press LB and write the
text. To either move or Edit the text, Pres s T, go to the text and when it changed from “fixed”
to “editable” one can Edit the text or move it by press Left button and move the text frame,
Press T again to exit edit/move mode of text.
SharpVue Plus
Or SharpVue XT
Settings: Change Editing color, mm/inch and more
Calibration: Use calibration to get more accurate values. See section page 13.
Live: Go back to live image.