Aven 26700-136, Руководство пользователя

Страница: 5 / 15

5
Unpacking and assembly
The system is delivered with the following items:
Inspection system
Remote control
Power Supply
Monitor Cable (Displayport)
PC cable (USB – USB mini)
Aven Software on a USB memory stick
Place the camera unit on proper location. Place the X-Y Gliding Stage or tilt table if you
prefer to use one. Connect the monitor cable from the monitor to the camera unit.
Connect the power cable from you power supply. You are now ready to start.
If you wish to use a computer . Connect your computer with the USB cable (USB mini to
SharpVue Plus/SharpVue XT, USB to computer). You need to install the included Aven
software from the USB memory stick. Read more under Software Page 8.
Picture of the Connectors.
You can now start the system by pressing the button at the top of the camera unit or
backside on the SharpVue XT, you can also turn the LED lamp on/off with the button on the
back of the SharpVue Plus.