Setup
To set up your AVE Stagepar Quad18 follow the below steps;
1.
Mount the item on your lighting stand or on the floor
2.
Connect the AC power cord from a grounded mains 240v power source.
3.
Power the fixture/s on from the mains socket
4.
Select the desired operation mode and press enter
Power Linking
The Stagepar is fitted with a PowerCon input (blue) and PowerCon output(white) that allows you to
power multiple pars from one (1) mains power connection.
To power link your fixtures;
1.
Ensure the mains power is off and unplugged from the wall
2.
Connect the white output connector from the first fixture and connect to the power input of
the second unit ensuring that the connector locks into place
3.
Repeat step 2 for each additional fixture
Mounting
The Stagepar is fitted with a Dual yoke that can be separated and used as a floor stand for use on flat
& sturdy surfaces.
For hanging the fixture to a lighting stand or trussing, simply attach a lighting clamp to the outer
yoke, ensuring that the clamp is tightened to prevent unwanted movement.
Next, attach a safety wire* through the eyelets located on the rear panel of the fixture. Secure the
safety cable to the stand or trussing.
*This is a secondary fall arrest; in the event the yoke or clamp fail, the fixture is safe from causing
serious injury or damage
Содержание STAGEPAR QUAD18
Страница 1: ...STAGEPAR QUAD18 User Manual...
