AVE REVO15, Руководство пользователя, Страница: 7 / 8

Quick Start Guide
To set up your AVE Revo15 DSP speaker up, follow the below steps;
1. Connect the Powercon AC power cord from a grounded mains 240v power source.
2. Connect the XLR line input, or mic input into the speaker.
3. Adjust both gain knobs to 0 (off).
4. Switch the power switch to the ‘ ON’ position.
5. Slowly increase the input’s gain knob to the desired level (ensuring that the speaker is not
distorting or clipping).