AVE LEDBAR-252, Руководство пользователя

Страница: 6 / 8

Setup
To set up your AVE LEDBAR-252 follow the below steps;
1. Mount the item on your lighting stand or on the floor
2. Connect the AC power cord from a grounded mains 240v power source
3. Power the fixture/s on from the mains socket
4. Select the desired operation mode and press ‘enter’
5. Wait approx. 10sec for the setting to take effect
In Auto/Sound mode, if sound is detected the light will automatically respond to the tempo of that
sound. If no sound is detected the fixture will ‘auto play’ the sequence / program at its preset speed.
Operation
To access the menus and functions of the LEDBAR-252, use the four (4) buttons located under the
main LCD control screen.
Button Label Function
Menu Press to access main menu, or change function once the fixture is on
Up Cycles upwards through the menu and options
Down Cycles downwards through the menu and options
Enter Press to select a menu option or save a setting
Menu Map
Main Level Program Level Description
Addr 1 – 512 DMX Address Value
3Ch RGB Control
Chnd 6Ch RGB C Auto
12Ch 2 Zone Control
24Ch 4 Zone Control
48Ch 8 Zone Control
SLAv NASt Master
SLA 1 Slave 1
SLA 2 Slave 2
Auto At 0 - 11 Auto/Sound Mode
Colo Red 0 - 255 Red Diode Intensity
Green 0 - 255 Green Diode Intensity
Blue 0 - 255 Blue Diode Intensity
ver - Firmware Version