AVE LEDBAR-24, Руководство пользователя

Страница: 6 / 8

Setup
To set up your AVE LEDBAR-24 follow the below steps;
1. Mount the item on your lighting stand or on the floor
2. Connect the AC power cord from a grounded mains 240v power source
3. Power the fixture/s on from the mains socket
4. Select the desired operation mode and press ‘enter’
5. Wait approx. 10sec for the setting to take effect
In Auto/Sound mode, if sound is detected the light will automatically respond to the tempo of that
sound. If no sound is detected the fixture will ‘auto play’ the sequence / program at its preset speed.
Menu Map
Main Level Program Level Description
Addr 1 – 512 DMX Address Value
3Ch RGB Control
Chnd 8Ch RGB C Auto
10Ch 2 Zone Control
29Ch 8 Zone Control
SLAv NASt Master
SLA 1 Slave 1
SLA 2 Slave 2
ShNd Auto on/off selection
Colo Static Colours (9 presets)
FAdE Colour Fade (9 speed settings)
SoUn Sound Active Mode (13 presets)
bLNd Yes / No Blackout
LEd On / Off Green Diode Intensity
DiSP - Inverts the display
bALA Red Red Balance
Green Green Balance
Blue Blue Balance
tESt - Fixture Test Sequence
tENP - Displays Fixture Temperature
FhrS - Displays Total Hours of Operation
ver - Displays Firmware Version