Setup
To set up your AVE Hex-Flat 6 follow the below steps;
1.
Mount the item on your lighting stand or on the floor
2.
Connect the AC power cord from a grounded mains 240v power source.
3.
Power the fixture/s on from the mains socket
4.
Select the desired operation mode and press enter
Power Linking
The Hex-Flat is fitted with a Mains IEC input and output that allows you to power multiple fixtures
from one (1) mains power connection.
To power link your fixtures;
1.
Ensure the mains power is off and unplugged from the wall
2.
Connect your IEC extension cable to the output connector from the first fixture and connect
to the power input of the second unit ensuring that the connector are firmly in place
3.
Repeat step 2 for each additional fixture up to 7 fixtures
Mounting
The Hex-Flat 6 is fitted with a Dual yoke that can be separated and used as a floor stand for use on
flat & sturdy surfaces.
For hanging the fixture to a lighting stand or trussing, simply attach a lighting clamp to the outer
yoke, ensuring that the clamp is tightened to prevent unwanted movement.
Next, attach a safety wire* through the eyelets located on the rear panel of the fixture. Secure the
safety cable to the stand or trussing.
*This is a secondary fall arrest; in the event the yoke or clamp fail, the fixture is safe from causing
serious injury or damage
Содержание HEX-FLAT6
Страница 1: ...HEX FLAT6 User Manual...