NOTES
For duration and warranty conditions regarding the single products, please visit
www.ave.it
and see the current commercial
catalogue.Products shall be sold in the original packaging otherwise the dealer and/or installer has the obligation to apply and submit
the instructions provided alongside the product and/or published in
www.ave.it
and on the current commercial catalogue to the user.
Ave products are installation products. They should be installed by skilled personnel in compliance with the laws in force and uses, in
accordance with the AVE S.p.A. storage, use and maintenance instructions. Installers are also required to meet the general sales
conditions, notes, general warnings, warranty conditions, claims and technical instructions indicated in
www.ave.it
and in the current
commercial catalogue.
BEFORE INSTALLING ANY AUTOMATION SYSTEMS IT IS RECOMMENDED TO ATTEND A TRAINING COURSE AND READ THE INSTRUCTIONS CAREFULLY.
ENG
C0737 - 00 - 120121
www.ave.it
800 015 072
International Trademark
registration n°
327040 - 942905 - 330600
1) WARNINGS AND PRECAUTIONS FOR USE
These devices can only be used in the context of an alarm system and in compliance with what is described in this
manual and in the manual of the compatible control units of the system (code AF927PLUS and AF927PLUSTC). They can
be installed inside rooms, within the indicated temperature limits. Opening the devices, with the exception of the battery
compartment, entails the immediate forfeiture of the industrial warranty. Any other use is to be considered improper and
prohibited. The manufacturer is not liable for damage resulting from improper use of the product, other than that provided
for in this manual. Read this manual carefully in all its parts.
1.1) DECLARATION OF CONFORMITY
The manufacturer, AVE S.p.A. declares that the equipment type AFGSM04-4G complies with directive 2014/53 / EU. The full text of the EU declaration of
conformity is available at the following Internet address: www.ave.it
2) GENERAL
The device is a telephone dialer that works on the:
2G: 900 / 1800 MHz
3G: B1 / B8
4G: B1 / B3 / B7 / B8 / B20 / B28A
3) INSTALLING THE DEVICE AND THE SIM CARD
Check in advance that the AF927PLUS or AF927PLUSTC control panel are positioned in a place with adequate coverage from the 4G signal of the chosen telephone
operator.
Art. AFGSM04-4G must be positioned inside the control unit, in the appropriate space located at the bottom right of the device (see image 1).
ATTENTION: the installation of the device and the insertion / extraction of the SIM card from it must only be carried out with the control
unit completely switched off (no 230Vac power supply and batteries disconnected).
4) INSTALLING THE SIM CARD
The SIM card to be used must be of the MINI SIM type.
For MICRO SIM cards, use a suitable commercial adapter.
The NANO SIM type cannot be used by the dialer.
Insert the SIM card in any phone and check:
• that the card is active
• that the PIN code is disabled
• that any messages, address books or telephone operator services are disabled
Remove the card from the phone and insert it (with the control unit completely off) in the slot on the AFGSM04-4G telephone dialer (see image 2).
Power up the control panel and wait a few minutes to allow reception of the 4G telephone network.
5) ASSOCIATION OF THE COMBINATOR TO THE CONTROL UNIT
The AFGSM04-4G combiner is automatically associated with the control unit when the latter is supplied with power.
6) PROGRAMMING
Enter the “settings” - “devices and areas” - “devices” menu of the control unit. Select the AFGSM04-4G device by clicking on the symbol depicting the eye and
configure the functional parameters of the dialer:
6.1)
Name: name associated with the device;
6.2)
SIM pin: enter the code 0000 if the PIN code has been deleted from the card.
6.3)
IMEI (International Mobile station Equipment Identity): code of the SIM card (parameter cannot be changed).
6.4)
Telephone operator: provider that provides the telephone line used (parameter cannot be changed).
6.5)
SIM expiry: sending a reminder of the expiry of the SIM inserted in the dialer.
6.6)
Credit request command: SMS to be sent to your operator to request the remaining credit on your SIM card.
6.7)
SIM operator number: number used by the SIM operator to provide its services (parameter acquired automatically).
6.8)
Server address: future preparation.
6.9)
APN (Access Point Name): It is a configuration that allows your smartphone to connect to the internet via your operator (parameter acquired automatically).
6.10)
User: future predisposition.
6.11)
Password: future predisposition.
6.12)
Voice message volume: volume of messages sent from the control unit to the set telephone number.
6.13)
Mobile data: if activated, allows data connection. If the control unit is configured as a client of a router, in the absence of the WI-FI connection the
AFGSM04-4G module will allow its remote management (if the 4G mobile network is present).
6.14)
Data-SMS only: the control unit only manages the connection to the AVE Cloud service (if the 4G mobile network is present) and the sending / receiving
of SMS messages, inhibiting the management of voice calls.
6.15)
Firmware Version: Firmware version installed on the device.
TECHNICAL SPECIFICATION
Power supply
10 – 14 Vdc
Current draw at rest
< 10 mA 2G
< 45 mA 4G
Current draw during operation
< 80 mA
Insulation Class
II
Environmental Class
(in accordance with EN50131)
2
Operating temperature
0 °C ... + 40 °C
Dimension
(WxDxH)
75 x 46 x 25 mm
Weight
50 g
1
2
ATTENTION: the control unit, in the event of a power failure, automatically inhibits the management of the WI-FI module and GSM 4G
making it impossible to manage via the AVE Cloud service.
However, it is possible to change this parameter to always allow the use of the WI-FI network and GSM 4G. To do this, it is necessary
to enter the “Communication parameters / Other configuration parameters” menu and activate the “Cloud connection in the absence
of network” parameter. The use of the WI-FI or GSM 4G module significantly increases the battery consumption of the control panel,
reducing its life time in the absence of the power supply network.
7) TELEPHONE DIALER TEST
From the control unit, enter the “System Test / Dialer Test / GSM 4G Module” menu, press the “eye” icon and select the type of test you want to perform. Enter the
telephone number to contact to activate the test.
8) TECHNICAL CHARACTERISTICS
With the aim of improving its products, AVE S.p.A. reserves the right to change the technical characteristics at any time and without notice while maintaining
functionality and intended use. In addition to what has already been described, the following technical characteristics refer to an ambient temperature of 20 ° C (+/- 5
° C) and to normal use of the appliance (residential environment).
AFGSM04-4G – telephone dialer 4G
