AVE CRONOTC1B, Инструкция по эксплуатации

Страница: 19 / 24

19
ENGLISH
Every configuration parameter featuring preset settings is identified on the
display by an index and a writing. To change parameter values use keys
▲
[key
1] and
▼
[key 2]; use key
►
[key 4] to move across parameters.
To go back to the initial page of the programming menu, press the ENTER key
[key 5] which will save changes.
If no key is pressed within 3 minutes, the chronothermostat will quit the
configuration program and will resume the operating mode being used
previously, without saving changed settings.
To cancel changed settings and to reset preset configuration parameter values,
keep keys
▲
[key 1] and
▼
[key 2] pressed simultaneously for about 4 seconds.
Index Parameter Writing Values Preset value
1 Type of connected card COn rEL / rAd / --- none
2 Temperature scale CELS o
FHAr °C / °F °C
3 Type of regulation Std o
ProP Std / ProP Std
3A Thermal differential DIFF HI / LO LO
3A Regulation band BAnd 1 °C – 4 °C (step 0.1°C) 2 °C
3B Regulation period Per 5 / 10 / 20 minutes 10 minutes
4 Separate temperature probe
configuration Sect --- / FLO / In /Out ---
4A Floor temperature limit Tflo 15 °C – 45 °C 27.0 °C
5 Ambient temperature
correction Corr -4.0 °C to +4.0 °C 0.0 °C
6 Optimization Opt ON/OFF OFF
6A Max. optimization duration
(hours) OPtH 1h – 5h 2h
7 Pump anti-seizure Pu ON/OFF OFF
8 Low battery bAtt --- / On / OFF OFF
9 Baud baud 0/1 0
10 Software release SOFt xxx xxx