INFORMATION 0
ON
INFORMATION 1
ON
INFORMATION 2
ON
INFORMATION 3
ON
EXIT
INFORMATION DISPLAY Setup
Press the “Up” or “Down” button to move the cursor to “IP ADDRESS” and press “Set” to
show or hide the Bank Information display.
4.) Press the “Up” or “Down” button to move the cursor to “Download Configuration” and
press “Set” to execute. Make sure a TCPIP232 Adapter is connected and the VSI-Pro will
download the configuration to this device.
TCPIP232 LED Indicators
GREEN
POWER
TCPIP-232 Power Status
RED
RECEIVE
TCPIP-232 Receive Data from ATM
GREEN
LINK
ATM Status, On = Ready/OFF = Not ready
YELLOW
SPEED
OFF = 10Mbps, On = 100Mbps Ethernet
RED
REGCOM
Regcom Network Communication
AVE RS485 Network
TCPIP232 is able to interface with multiple devices on AVE RS485 Network that uses the
Vnet or Regcom Protocol. The TCPIP232 is a slave device which needs to connect with
master unit for the purpose of transaction logging.
Before connecting to the RS485 network, you must program the TCPIP232 Adapter to be the
same protocol of the RS485 network so the ID will not duplicate with another devices.
Cables and Pin assignments
TCPIP232 Stand alone - VSI-Pro(AVE P/N: 021-041-SF)
This is RS232 cable for sending data to the VSI-Pro in Generic mode and Output to
the DVR.
TCPIP232
VSI-Pro
DVR
DB9 Male
DB9 Male
DB9 Female
Pin-5(GND)-------------------------Pin-5(GND)----------------------------Pin-5(GND)
Pin-3(TXD)-------------------------Pin-2(RXD)
Pin-3(TXD)-----------------------------Pin-2(RXD)
Pin-1(Alarm)
Note: You must use 021-037-SF to program the IP Address of the TCPIP232 Adapter first
and then connect using 021-041-SF.
42
