DMX Channel
CH1
Mode
0 - 49
Laser OFF
50 - 99
DMX Mode (Static Patterns)
100 - 149
DMX Mode (Dynamic Patterns)
150 - 199
SOUND Mode
200 - 255
AUTO Mode
CH2
Pattern Select
0 - 255
Selecting built-in patterns
CH3
X Axis Moving
0 - 255
Manual adjust position X-Axis
CH4
Y Axis Moving
0 - 255
Manual adjust position Y-Axis
CH5
Scanning Speed
0 - 255
Fast (0) to Slow (255)
CH6
Pattern Play Speed
(Dynamic Patterns)
0 - 255
Fast (0) to Slow (255) - 10 speed increments
CH7
Static Pattern Size
0 - 255
Small (0) to Large (255)
Technical Specifications
:
Power Input:
Mains 240V AC / 50Hz
Power Consumption:
30W
Laser Power:
Red 100mW
Green 30mW
Blue 100mW
Red 100mW
DMX Channels:
7 Channels
DMX Connectors:
3-Pin XLR
Dimensions:
600 x 180 x150mm
Weight:
6.8kg
Trouble Shooting:
1.
If the power indicator is off and the laser doesn't work, please check the power supply and input connection
2.
In Sound mode if the power supply indicator is ON and the sound active indicator is OFF but the laser doesn't work;
a.
Check sound sensitivity level
b.
Check run mode is set to Sound Mode and not DMX or Slave Mode.
3.
In Master/Slave mode the slave lasers aren't working;
a.
Check that there's only 1 master in the chain
b.
Make sure your connections and cables are secure
c.
Check the master is on an auto mode (sound / auto)
4.
In DMX mode, the unit can't be controlled with a DMX controller but the DMX signal is flashing.
a.
Check the DMX address is the same on the controller and the unit
b.
Check the DMX controller is not on 'blackout'
5.
If the output beam direction is skewed or of centre, reset the unit. If problem persists return to place of purchase for
calibration.
6.
If the unit fails, power OFF and wait 5 minutes before powering on again.
If you come across additional problems contact AVE on (03) 9706 5325
Содержание 4-RAY
Страница 1: ...4 RAY 330mW RGBR Laser Users Manual ...
