4x4 HDMI 2.0 Matrix Kit
6
3.2 Matrix Rear Panel
①
INPUT: Four Type A female HDMI input ports to connect HDMI sources.
②
IR IN:
⚫
1~4: Four 3.5mm jacks to connect four IR receivers. Each IR input is associated
with the respective HDBaseT output and cannot be switched separately. It
makes up a bi-directional IR transmission with the IR OUT on the corresponding
HDBaseT receiver.
⚫
ALL IN: 3.5mm jack to connect the IR receiver to transmit the IR signal from the
ALL IN port to all HDBaseT receivers.
③
IR OUT:
⚫
1~4: Four 3.5mm jacks to connect four IR emitters to send the IR signal
received from the corresponding HDBaseT receivers.
⚫
ALL OUT: 3.5mm jack to connect the IR emitter to send the IR signal received
from all HDBaseT receivers.
④
OUTPUT: Four HDBaseT RJ45 outputs to connect the four HDBaseT receivers,
four local HDMI ports to connect local displays.
⑤
AUDIO OUT:
⚫
Four 3-pin terminal blocks for analog audio output.
⚫
Four coaxial jacks to separate the digital audio from HDMI inputs and HDBaseT
outputs via GUI or RS232 commands.
⑥
RS232: Four 3-pin terminal blocks to control the third-party devices base on
RS232 pass-through feature. There is a one-to-one correspondence between the
four RS232 ports and the four RS232 ports of four HDBaseT receivers.
⑦
CONTROL
⚫
3-pin terminal block to connect a computer to control the matrix by sending
RS232 commands.
⚫
IR EYE: 3.5mm jack to connect IR receiver to receive IR signal from the
included IR remote to control the matrix.
4
1
2
3
4
L
R
1
2
3
4
H
D
B
a
s
e
T
H
D
M
I
1
2
3
4
Tx
Rx
1
2
3
4
ALL IN
1
2
3
4
ALL OUT
IR EYE
RS232
Tx
Rx
TCP/IP
Input
De-embedded
Output
De-embedded
FW
1
2
3
1
2
3
4
1
6
7
8
9
2
3
4
5
