User manual
Drive unit DAE-01 CL
7
3.3
„OFF“
The drive unit is switched off and is in standby mode. The motor is in free-
wheel mode and can be moved easily.
„OFF“ appears in the display and disappears after approx. 10 s.
after 10 s
3.4 M
otion Care function
The Motion Care function maintains the drive belt and all bearings asso-
ciated with the platter movement. To do this, the drive unit „wakes up“
after a waiting time of 24 h and rotates the platter at a reduced speed for
about 20 s.
Once the set rotation time has elapsed, the motor stops and the drive unit
starts to countdown the waiting time until the next run of Motion Care.
When the Motion Care function is activated, the current status of the func-
tion is shown on the display.
Display
Motion Care Status
The remaining time until the next Motion Care run is
displayed in „hh.mm“.
If the remaining time until the next Motion Care run is
less than 1 h, the display changes to „mm.ss“.
The leading „P“ indicates an active „Motion Care“ run.
While a Motion Care run is performed, the remaining
active time is displayed in seconds „ss“.
